For valuable service information regarding Xcelorin Brushless Motors and ESCs please visit the Xcelorin section of the
Losi Forum.
Below you will find the links to the latest software updates for Losi's Xcelorin
Brushless Systems. The following downloads will enable you to configure your Xcelorin ESC.
Xcelorin Software Installation Requirements:
- Windows Operating System preferably Windows XP or higher
- An available USB port, (version 1.0 or 2.0)
- You must have FULL Administrator rights on your computer to install
- If using Windows Vista you may find you need to login under the Administrator account
- Windows Vista 64 bit operating system is currently not supported
- You may need to temporarily disable your Anti-Virus Software only to complete the install of the hardware drivers
Please read the Xcelorin Software Installation Instructions before downloading and installing the Xcelorin Software Setup Program to your machine.
Do not attempt to install a lower version of firmware to your ESC without first contacting product support productsupport@horizonhobby.com. Failure to do so may result in damage to your ESC.
You must right click the file and select "Save As" in order to download the file correctly.
Xcelorin Software Setup Program for ALL Xcelorin ESCs
Setup.exe
Version: 3.0
Date: August 28, 2009
File Size: 2.55 MB
Uninstall previous Xcelorin Software Setup Programs before updating to this version.
|
|
Firmware for 1/18 Xcelorin Sensorless ESC (LOSB9535) ONLY
C010115.LSC
Version: 1.5
Date: February 13, 2009
File Size: 42 KB
Release Notes: Updates for braking function and feel
|
|
Firmware for 1/10 Xcelorin Sensorless ESC (LOSB9515) ONLY
E010134.LSC
Version: 3.4
Date: April 1, 2009
File Size: 42 KB
Release Notes: Updated to eliminate occurrence of ESC going into reverse after frequent connection/disconnection from PC.
|
|
Firmware for 1/10 Xcelorin Sensored ESC (LOSB9500) ONLY
D01012901.LSC
Version: 2.9
Date: June 18, 2009
File Size: 40 KB
Release Notes: Updated to fix issue where ESC may default back to a profile different than the
last one used.
|
|
Firmware for 1/8 Sensorless ESC (LOSB9516) ONLY
F010122.01.LSC
Version: 2.2
Date: September 1, 2009
File Size: 44 KB
Release Notes: Allows selection of low and medium initial acceleration for smoother starts and
fixes issue where changes to the throttle profile would affect braking
performance when braking was set to less than 40%. Must be used in conjunction
with Version 3.0 of the Xcelorin Software Setup Program.
|
If you need to return your Xcelorin item to Product Support for any
reason, please include a completed copy of the Xcelorin Product Support Form.