Available for*: $399.99
Find a Retailer
20 Photos |
8IGHT-T Nitro RTR: 1/8 4WD Truggy
This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.
At a Glance
If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
- Your fast track to nitro truggy racing
- 4mm T-6 aluminum chassis plate
- Spektrum™ ultra-torque waterproof metal-gear steering servo
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Metal-gear transmission and sealed differentials
- Pre-set suspension geometry
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
- Spektrum™ waterproof metal-gear servo
- Includes Spektrum DX2E DSMR® transmitter
- Includes Dynamite 1600mAh 6V NiMH receiver pack
Length:18.75 in (476mm)
Width:16.38 in (416.1mm)
Height:7.30 in (185.5mm)
Wheelbase:14.93-15.09 in (379-383mm)
Chassis:4mm Plate, Aluminum
Tire Type:Losi XTT
Motor or Engine:Dynamite .28 Nitro Engine
Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Shock Type:15mm bore, Composite
Ball Bearings:Full Precision Ball Bearings
Fuel Tank Capacity:150cc
Needed to Complete
• 20–30% Nitromethane fuel
• Nitromethane-Approved Dispenser
• NiMH Charger
• Glow Igniter