Due Early December, 2020

MSRP: $49.99
Available for*: $44.99
*at participating retailers

Find a Retailer


Buy Now

WP 60A FWD/REV Brushed ESC

At a Glance

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.

* While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.


  • Waterproof for all weather operation *
  • 2-3S LiPo and 5-9 cell NiMH compatible
  • Program functions changed with the use of jumper pins
  • Up to an 12T motor limit
  • Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles
  • Crawler running mode
  • Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation

Product Specifications




Time Delay Brake:Yes

Continuous Maximum Current:FWD: 60A REV: 30A

Input Voltage:2-3S Lipo, 5-9 cells NiMH/NiCd

Input Connector Types:EC3

Output Connector Types:3.5mm Tamiya style bullet

Motor Limit:2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors

Momentary Peak Current:FWD: 360A REV: 180A

Length:1.48 in (37.5mm)

Width:1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs

Height:0.71 in (18mm)

Weight:1.41 oz (40g)

BEC Voltage:5V

PWM Frequency:1KHz

Overload Protection:Yes

Full On Resistance:.0008 ohms

Wire Gauge:16AWG

Auto Cutoff:Yes